4-TERMINAL Bus Block Strip
SPEEDWAY MOTORS | Part# SPD-64005
In Stock
$6.99
Overall Length: 2.15"
Overall Width: .87"
Overall Thickness: .47"
Hole Diameter: .17"
Sold in Quantity: Each
Info
Connect all the wires in your panel or enclosure in one convenient place. Also known as barrier terminal strips, these blocks have screw terminals—just loosen a screw and wrap a stripped wire end around it (or use a spade terminal) and tighten the screw. All have four mounting holes. Color is black. UL recognized and CSA certified.
- Phenolic block
- Tin-plated brass terminals
- Ni-plated steel screws
- Amps Per Circuit: 20A
- For Wire Size, AWG: 22-12
- Screw Terminal Size: #6-32
- Center-to-Center: 0.38"
- Mount Hole Diameter: 0.17"
Note: These are terminal strips and are NOT intended for use as ground strips. To be used as a ground strip, all terminals on one side would need to be pigtailed together.
Item Details
2.16" L x 0.87" W x .047" H
Overall Width: .87"
Overall Thickness: .47"
Hole Diameter: .17"
Sold in Quantity: Each
Info
Connect all the wires in your panel or enclosure in one convenient place. Also known as barrier terminal strips, these blocks have screw terminals—just loosen a screw and wrap a stripped wire end around it (or use a spade terminal) and tighten the screw. All have four mounting holes. Color is black. UL recognized and CSA certified.
- Phenolic block
- Tin-plated brass terminals
- Ni-plated steel screws
- Amps Per Circuit: 20A
- For Wire Size, AWG: 22-12
- Screw Terminal Size: #6-32
- Center-to-Center: 0.38"
- Mount Hole Diameter: 0.17"
Note: These are terminal strips and are NOT intended for use as ground strips. To be used as a ground strip, all terminals on one side would need to be pigtailed together.
Item Details
2.16" L x 0.87" W x .047" H
