Imca Spec RH HD Upper Control Arm
SPEEDWAY MOTORS | Part# SPD-910-34394R
In Stock
$74.99
Control Arm Style: Tubular
Mounting Bolt Center to Center: 6.875"
Material Type: Steel
Sold in Quantity: Each
Bushing Material: Steel
Overall Width: 12.25"
Ball Joint Type: Bolt-in
Shaft Diameter: 1.25"
Info
IMCA rules allow the Stock Car class to use spec tubular upper control arms. The stock stamped steel arms are getting hard to find and dont have the strength of these tubular arms. These A-arms bolt to your stock mounts and accept stock ball joints. These control arms have a 1/4" thick steel plate where the ball joint bolts in. Fits 1978-87 mid-size GM Metric chassis.
- Chromoly steel construction
- 1" tube diameter, 0.092 wall
- Steel cross shaft
- Bolts to stock 1978-87 Metric mounts (6-7/8" center-to-center)
- Greaseable steel bushings
- Accepts stock K5208 style Metric ball joints
- IMCA Approved stickers
- Right hand side (passenger side)
- Arm length is 8"
Mounting Bolt Center to Center: 6.875"
Material Type: Steel
Sold in Quantity: Each
Bushing Material: Steel
Overall Width: 12.25"
Ball Joint Type: Bolt-in
Shaft Diameter: 1.25"
Info
IMCA rules allow the Stock Car class to use spec tubular upper control arms. The stock stamped steel arms are getting hard to find and dont have the strength of these tubular arms. These A-arms bolt to your stock mounts and accept stock ball joints. These control arms have a 1/4" thick steel plate where the ball joint bolts in. Fits 1978-87 mid-size GM Metric chassis.
- Chromoly steel construction
- 1" tube diameter, 0.092 wall
- Steel cross shaft
- Bolts to stock 1978-87 Metric mounts (6-7/8" center-to-center)
- Greaseable steel bushings
- Accepts stock K5208 style Metric ball joints
- IMCA Approved stickers
- Right hand side (passenger side)
- Arm length is 8"
